|
Cut-to-Length/Multiple-Blanking |
|
| First Name |
|
| Last Name |
|
|
| Company |
|
| Type of Business |
Service Center
Manufacturer
Other
|
|
| Street Address |
|
| City |
|
| State |
|
| Zip or Local Code |
|
| Country |
|
| Phone |
|
| Fax |
|
| E-mail Address |
|
|
| Min. Material Thickness |
|
| Max. Material Thickness |
|
| Width of Coil, Max. |
|
| Weight of Coil, Max. |
|
| Primary Material to be Run |
HR CRS.S.Alum. |
| Grade/Series-Hardness or Temper |
|
| Secondary Material to be Run |
HRCRS.S.Alum. |
| Grade/Series-Hardness or Temper |
|
| Tertiary Material to be Run |
HRCRS.S.Alum. |
| Grade/Series-Hardness or Temper |
|
| Other Material to be Run |
|
| Grade/Series-Hardness or Temper |
|
|
| Yes No |
Prepainted or Critical-Surface Materials? |
| Yes No |
Vinyl or Paper Interleaving Needed? |
| Yes No |
Is Flatness Critical? |
| Yes No |
Corrective Leveling Required? |
| Yes No |
Edge Trimming? |
Chopper
Baller |
Type of Trim Handling |
| Yes No |
Slitting? |
|
|
Max. no. of Slits Across Coil |
|
Min. Stacked Blank Length |
|
Max. Stacked Blank Length |
|
End Exit
Side Exit |
Stack Discharge Direction |
|
10,000 lbs (4.5 kg)
20,000 lbs (9.0 kg) |
Max. Stack Weight |
|
± 0.005"
(± 0.13mm)
± 0.015"
(± 0.38mm)
± 0.030"
(± 0.8mm)
± 0.060"
(± 1.5mm) |
Cut Length Tolerance Required |
|
| |
Budget for Machine Purchase |
| |
Production, Annual Tonnage |
|
| Comments/Special Requests |
|
|
